(00292)H B - 5
*** Image Quality Settings ***
・GAIN_SEL Gain settings fx Cameras (-1: disabled, 0: 0dB, 6: 6dB, 12: 12dB)
GX Cameras (LOW, NORMAL, HIGH)
・GAMMA_SEL Gamma settings (-1: disabled, 0: OFF, 2: LOW, 4: NORMAL)
・ENH_SEL Enhance settings (-1: disabled, 0: OFF, 2: LOW, 4: NORMAL, 6:
HIGH)
・KNEE Knee settings (-1: disabled, 0: OFF, 1: ON)
・LPF_ENB Low pass filter settings (-1: disabled, 0: OFF, 1: ON)
・CHROMA Chroma settings (0: 0%, 25: 25%, 50: 50%, 75: 75%,
100: 100%, 150: 150%, 200: 200%)
-1: disabled, CHGAIN_NUM, CHGAIN_DENOM also set to -1
・CHGAIN_NUM Numerator for custom chroma value
・CHGAIN_DENOM Denominator for custom chroma value
Custom chroma Saturation: CHGAIN_NUM / CHGAIN_DENOM[%]
・HUE Hue (color matching) (-9999: disabled, -180~+180 [degree])
・CONTRAST Contrast (-1: disabled, 0~6400[%])
・BRIGHTNESS Brightness (Brightness) (-9999: disabled, -180~+180:[%])
・WB_SEL Select white balance (-1: disabled, 0: custom,
1: 3100K, 2: 5000K, 3: 9000K, 4: REG, 5: Auto)
・WB_RGAIN White balance value R gain value [0.0~] (Value with conversion algorithm A)
・WB_BGAIN White balance value B gain value [0.0~] (Value with conversion algorithm A)
・WB_YRGAIN White balance value R gain value [0.0~] (Value with conversion algorithm B)
・WB_YBGAIN White balance value B gain value [0.0~] (Value with conversion algorithm B)
・WB_YGGAIN White balance value G gain value [0.0~] (Value with conversion algorithm B)
・INPUT_BLACK_LEVEL Input black level value
・RGB_MATRIX RGB matrix conversion (1: ON, 0: OFF)
･FRAME_RATE Conversion frame rate
･LUT_SEL Luminance (NORMAL, LINEAR, CUSTOM, TABLE)
*** The following items are valid only when LUT_SEL =CUSTOM ***
･CUSTOM_LUT_MIN Minimum input value for brightness
･CUSTOM_LUT_MAX Maximum input value for brightness
･CUSTOM_LUT_GAMMA Gamma value for brightness properties
To Next Page
Loading...