(00292)H C - 3
Followings are for Q Cameras only.
・LOWLIGHTEXP frame rate when low light recording
・ROTATE_IMAGE rotate image
・REVERSE_IMAGE_TB Reverse image vertical
・REVERSE_IMAGE_LR Reverse image horizontal
・SAVE_RANGE_MODE save range mode
・FRAME_TIME frame time
・CAMERA_TIME camera time
・EST1_INPUT EST1 input polarity
・EST1_FILTER EST1 filter
・EST_VIEW Qcam, HX, GX, EST View
・TRIG1_INPUT Trig1 input polarity
・TRIG1_FILTER Trig1 filter
・EPO_SEL Qcam Output Sync Signal
・GTRIG_SEL G trigger
・GTRIG_DELAY will not be used (always shows “0”)
・GTRIG_LEVEL G trigger level
・EXPOSURE_TIMING Exposure timing
・PIXEL_BIT_DEPTH Pixel bit length
・BB_SEL Black Balance ON/OFF
・EXPOSURE_PHASE Exposure phase
・RGB_MATRIX RGB matrix
・FRAME_RELATIVE_TIME Standards for frame relative time
・SCENE_NO Scene No.
To Next Page
