NEC Electra Elite IPK - Access Code (3-Digit) Assignment

2 - 52 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
1-1-48 Access Code (3-Digit) Assignment
General Description
Use this Memory Block to assign a 3-digit number as an Access Code.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 +
DH
to access the Memory Block.
3 Enter the Function No. for Dial No. 0 for Third Digit Table No. 01 using the dial pad.

Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data
B
and
J
to enter ,
B
and
L
to enter #
Default Values
All Dial 000 (Not Used)
4 Press
G
to write the data and display the next Dial No.
5 After last Dial No. entry, press
G
to write the data and display Third Digit Table No. 02, Dial No. 0.
6 Enter Function No. for Dial No. 0, and press
G
to write the data and display the next Dial No.
7 After last Dial No. entry for Table 02, press
G
to write the data and display Third Digit Table No. 03, Dial No. 0.
8 Enter Function No. for Dial No. 0, and press
G
to write the data and display the next Dial No.
9 After last Dial No. entry for Table 03, press
G
to write the data and display Third Digit Table No. 04.
10 Enter Function No. for Dial No. 0, and press
G
to write the data and display the next Dial No.
11 After last Dial No. entry for Table 04, press
G
to write the data and display the next Memory Block.
12 Program next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-46
Access Code (1-Digit) Assignment
1-1-47
Access Code (2-Digit) Assignment
System Mode
1
Submode
1
Data No.
48
PC Programming
¦ +BA
4 8 : 3 D G / 0 1 ( 0 ) = 0 0 0
T I M E D I S P L A Y
Function
No.
Data
No.
Third
Digit
Table
No.
(01~04)
Dial
No.
0~9
Title