Elite IPK Document Revision 1
Programming Manual 3 - 359
___________________________________________________________________________________
___________________________________________________________________________________
1-16-13 VLAN Group to VLAN ID Assignment
General Description
Use this Memory Block to assign a VLAN ID to each VLAN Group.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK16 +
AC
to access the Memory Block.
3 Use dial pad keys to enter Setting data.
Use the following to enter data:
Use
J
to move cursor left
Use
L
to move cursor right
Use
K
~
I
to enter numeric data
ID range is 0001~4095 (0x001~ 0xfff Hex).
Default Values
:
0001 (0x001 Hex
4 Press
G
to write the data.
5 Repeat steps 3 and 4 for each HUB(8)-U( ) ETU and VLAN Group.
6 Press
E
to go back on-line.
System Mode
1
Submode
16
Data No.
13
PC Programming
¦
+AB
1 3 : 1 1 D 0 1 = 0 0 0 1
T I M E D I S P L A Y
Data
No.
Setting
Data
Title
VLAN Gp
01~16
HUB
1~3
To Next Page
Loading...
