2 - 76 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
1-1-65 Code Restriction Class Allow/Deny
Selection
General Description
Use this Memory Block to assign Code Restriction Classes
01~14
as Allow or Deny.
This assignment is used when there is no match or there is an overlap (duplicate
numbers in tables with opposite assignments) of numbers in the 8-Digit Matching
Tables.
Display
Settings
Related Programming
Refer to Chapter 3 Advanced Applications, Section 1 Code Restriction on page 3-1.
Notes
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
The shaded
selection is the
default.
YS
(Allow)
NO
(Deny)
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 +
FE
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Default Values
Class 01~04 Allow (YS)
Class 05~14 Deny (NO)
4 Press
G
to write the data and advance to the next Class. Repeat steps 3 and 4 until last Class is assigned.
5 The next Memory Block is displayed.
6 Program the next Memory Block or press
E
to go back on-line.
1. When a match is not found or duplicate match is made with opposite assignments, the system uses this memory
Block.
2. When the interdigit dialing time duration exceeds 10 seconds while a restricted station user is dialing on an
outside line, the system automatically drops the call.
System Mode
1
Submode
1
Data No.
65
PC Programming
¦
+AC
Data
No
6 5 : C L A S S ( 0 1 ) = Y S
T I M E D I S P L A Y
Class
No.
01~14
Title Function
To Next Page
Loading...
