Elite IPK Document Revison 1
Programming Manual 2 - 395
___________________________________________________________________________________
___________________________________________________________________________________
3-17 Tie Line Answer Detect Time Selection
General Description
Use this Memory Block to specify the time before an Elite IPK system answer
(off-hook) is recognized as an answer.
Display
Settings
Page 1
Notes
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
The shaded
selection is the
default. Times
are in
milliseconds.
0 130 260 390
520 650 780 910
Page 2
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
1040 1170 1300 1430 1560 1690 1820 1950
Programming Procedures
1 Go off-line.
2 Press LK3 +
G
+
AG
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change answer detect time for CO/PBX No.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or CO/PBX No.
– OR –
D
to go to the next assigned CO/PBX No.
C
to go to the next page
A
to go to the previous page
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
1. Answering a call may be impossible if the CO answer detect time is too long.
2. This Memory Block affects T1 channels assigned as Tie/DID lines.
CO/PBX Line Mod
To Next Page
Loading...
