Electra Elite IPK Document Revision 1
Programming Manual 2 - 205
___________________________________________________________________________________
___________________________________________________________________________________
1-8-18 Site Name Assignment
General Description
Use this Memory Block to specify a site name for PC Programming software to use to
program the system.
Display
Notes
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
AH
to access the Memory Block.
3 Use the Character Code Table in Chapter 3 Advanced Applications, Section 1 Code Restriction on page 3-1 and enter up to
eight characters for Setting Data.
Use the following to enter data:
H
to clear data at cursor
4 Press
G
to write the data. The next Memory Block is displayed.
5 Program next Memory Block or press
E
to go back on-line.
1. When programmed, this assignment creates a directory in the PC after download is performed.
2. System Software allows the name to be entered using the dial pad instead of the ASCII Character Code Tables.
Follow the procedure in Appendix B Character Codes, Section 1 Character Assignment on page B-1.
System Mode
1
Submode
8
Data No.
18
PC Programming
¦
+CSN
Data
No.
1 8 : S I T E =
T I M E D I S P L A Y
Setting
Data
Class
No.
1,
2
To Next Page
Loading...
