NEC Electra Elite IPK - Tie Line Code Restriction Assignment

2 - 80 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
1-1-69 Tie Line Code Restriction Assignment
General Description
Use this Memory Block to restrict outgoing Tie line dialed digits.
Display
Settings
Related Programming
Refer to Chapter 3 Advanced Applications, Section 1 Code Restriction on page 3-1.

Notes

LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
NO
YS
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 +
FI
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option. Default Values
Restriction
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
When Tie lines are assigned code restriction, the Access Code used to dial out of the distant system must be
entered in front of the dialed number in the 8-Digit Matching Tables.
System Mode
1
Submode
1
Data No.
69
PC Programming
¦ +AC
Data
No.
6 9 : T I E R E S T = Y S
T I M E D I S P L A Y
Title
Setting
Data
Title