NEC Electra Elite IPK - SCD Group Agent Assignment

2 - 212 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Electra Elite IPK
1-8-30 SCD Group Agent Assignment
General Description
Use this Memory Block to assign stations to one of four simplified call distribution
groups. A total of 32 stations can be assigned.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
CK
to access the Memory Block.
3 Use dial pad to enter Grp (1~4) and the Setting Data (station number) for each agent.

Use the following to enter data:
K
~
I
to enter digits
J
to move cursor left
L
to move cursor right

Setting Data = Maximum of 4 digits
Default Values
Not Assigned
4 Press
G
to write the data and select the next Agent No.
5 Repeat Steps 3 and 4 for each remaining Agent No. The next Memory Block is displayed.
6 Program next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-8-29
SCD (Simplified Call Distribution) Pilot Number Assignment
System Mode
1
Submode
8
Data No.
30
PC Programming
¦ +AA
3 0 : S G 0 1 1 =
T I M E D I S P L A Y
Data
No. Title
Setting
Data
Agent
1~32
Group
1~4