NEC Electra Elite IPK - Programming Methods; Initializing the System; Using the Multiline Terminal for Programming; Figure 1-2 Elite IPK Multiline Terminal

1 - 6 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
2.5 Programming Methods
2.5.1 Initializing the System
Turn on the new Key Service Unit (KSU) power supply. After
approximately 30 seconds, the system operates with the system
default values.
2.5.2 Using the Multiline Terminal for Programming
System programming can be performed using a Display Multiline
Terminal that is connected to station port 01 or 02.
Figure 1-2 Elite IPK Multiline Terminal shows the terminal in the
offline mode.
Figure 1-2 Elite IPK Multiline Terminal
Message
Waiting LED
Help
Key
Exit
Key
Flexible Line
Keys
Recall
Key
Redial
Key
Speaker
Key
Answer
Key
Transfer
Key
MIC
Key
Hold
Key
Dial
Keys
Display (LCD)
Softkeys
Conference
Key
Feature
Key
Directory Key
Message Key