NEC Electra Elite IPK - Station Port Numbering Plan; Figure 1-4 Page Switching for Data Values

Elite IPK Document Revision 1
Programming Manual 1 - 11
___________________________________________________________________________________
___________________________________________________________________________________
Figure 1-4 Page Switching for Data Values is an example of 10 data
values. Values are displayed on two pages.
2.5.5 Station Port Numbering Plan
Some Memory Blocks require entering a 2-digit port number. The
Elite IPK system supports 48/120 ports, respectively. Programming
values for entry of Port Assignments are defined below:
Figure 1-4 Page Switching for Data Values
Port Assignments Programming Value
01~99 01~99
100~109 A0~A9
110~119 B0~B9
120 C0
To enter an A, B, or C, press
B
and 1, 2, or 3.
(Page 1)
LK 1 LK 2 LK 3 LK 4
Data 01 Data 02 Data 03 Data 04
LK 5 LK 6 LK 7 LK 8
Data 05 Data 06 Data 07 Data 08
16-Key Multiline Terminal
(Page 2)
LK 9 LK 10 LK 11 LK 12
Data 09 Data 10
LK 13 LK 14 LK 15 LK 16
LCD Display:
01 to indicate Page 1
LCD Display:
09 to indicate Page 2