Electra Elite IPK Document Revision 1
Programming Manual 2 - 117
___________________________________________________________________________________
___________________________________________________________________________________
Notes
5 Press
G
to write the data. The next Memory Block is displayed.
6 Program the next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
7-1
Card Interface Slot Assignment
1-2-04
Call Arrival Key Block Assignment
1-2-21
PS Telephone Block Assignment
4-07
Code Restriction Class Assignment (Day Mode)
4-08
Code Restriction Class Assignment (Night Mode)
4-40
LCR Class Selection
4-54
Enhanced 911 CESID to Station Table Assignment
4-56
SMDR Telephone Print Selection
4-67
IP Station Number Assignment
4-68
LCD Line Key – Name Assignment
1. The Electra Elite IPK Expanded Port Package (192) allows a maximum of 120 ports to be shared by station ports
(ESI, SLI, FMS/VMS, and OPX) and Call Arrival Keys. When 32 station ports are being used, 88 remain for use
as Call Arrival (CAR) Keys.
2. The total number of shared and CAR ports are shared with PS ports.
3. The Electra Elite IPK Basic Port Package (48) allows a maximum of 32 ports to be shared by stations (ESI, SLI,
FMS/VMS, and OPX) and Call Arrival Keys. In addition to the shared ports, 40 dedicated CAR ports can also be
defined. Dedicated CAR ports are 33~72.
4. When IPC ETU is being used, 30 IP Phones can be installed in the Electra Elite IPK Basic Port Package (48)
using dedicated ports 33~64.
Programming Procedures
To Next Page
Loading...
