NEC Electra Elite IPK - Page 258

Electra Elite IPK Document Revision 1
Programming Manual 2 - 187
___________________________________________________________________________________
___________________________________________________________________________________
Classes 00
~
15 are programmed in this Memory Block as feature restriction classes. In Memory Block 4-17 (Station to
Class of Service Feature Assignment) specify any class of service for each telephone to assign features the user can/
cannot activate.
Corresponding
CO/PBX Line
Key
Function Name
Default
Class 00
Default
Class 01
~
15
Page 1
LK1 Night Mode Switching (System-Wide)) Allow Deny
LK2 Night Mode Switching (Tenant) Allow Deny
LK3 System Speed Dial Programming Allow Deny
LK4 Not Used N/A N/A
LK5 Not Used N/A N/A
LK6 Not Used N/A N/A
LK7 Automatic Trunk-to-Trunk Transfer (Set/Reset) and programming of
Outgoing Numbers
Allow Deny
LK8 Automated Attendant/DISA Mode (Set/Reset) Allow Deny
Page 2
LK1 Timed Alarm (Set/Reset) for Single Line Telephones (From Attendant) Allow Deny
LK2 Call Forward-All Call (Set/Reset) from Destination Station, Call Forward
CAR Keys, Call Forward All Call Set, and Call Forward Busy/No Answer
set
Allow Deny
LK3 System-Wide Reset of Timed Alarm, Call Forward-All Call, Do Not
Disturb, Customized Message, and Callback Request
Deny Deny
LK4 Cancel Station Lockout and Default Password for another Station Allow Deny
LK5 DISA Password Cancel Allow Deny
LK6 DISA Password Confirmation Allow Deny
LK7 Automated Attendant Weekend Mode (Set/Reset) Tenant Allow Deny
LK8 Forced Account Code/Authorization Code Programming Allow Deny
Page 3
LK1 Terminal Exchange Mode Set Allow Deny
LK2
~
LK8 Not Used N/A N/A