Electra Elite IPK Document Revision 1
Programming Manual 2 - 223
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1. Only one CAMA or ISDN PRI trunk can be assigned per system.
2. The E911 trunk can be connected to a COI(4)/(8)-U( ), COID(4)/(8)-U( ), COIB(4)-U( ), or COIB(8)-U( ) ETU.
3. Information provided to the E911 system is called Caller Emergency Service Identification (CESID) that can be a
7- to 10-digit number. Caller ID can be used instead of CESID. The E911 Operator data base uses Caller ID or
the CESID to provide a callback number and location for emergency response.
4. To seize the E911 trunk:
Dial 911 after receiving internal dial tone.
Dial 911 after accessing an outside trunk with a line key.
Dial 911 after accessing an outside trunk with an access code.
To Next Page
Loading...
