Electra Elite IPK Document Revision 1
Programming Manual 2 - 317
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1-15-05
Destination Point Code Transfer Assignment
1-15-06
Originating Office Code Number Assignment
1-15-08
Link Reconnect Allow/Deny Selection
1-15-09
K-CCIS Maximum Call Forwarding Hop Assignment
1-15-10
Calling Name Display Allow/Deny Selection
1-15-11
Centralized Billing Allow/Deny Selection
1-15-12
Centralized Billing – Point Code of Center Office Assignment
1-15-13
Centralized Day/Night Switching for Remote Office Assignment
1-15-14
Centralized Day/Night Switching for Main Office Assignment
3-70
CIC Number Assignment
5-05
Common Signaling Channel Route Selection
1-1-05
Start Time Selection
1-5-02
SMDR Print Format
1-5-13
Printer Connected Selection
1-5-14
Printer Line Feed Control Selection
1-5-25
SMDR Valid Call Time Assignment
1-5-26
SMDR Incoming/Outgoing Print Selection
1-8-35
COM Port Baud Rate Setting Assignment
4-56
SMDR Telephone Print Selection
When a response from the distant system is not received in the specified time, the system cancels the call. The
user hears Reorder Tone and CONGESTION is displayed.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
