Electra Elite IPK Document Revision 1
Programming Manual 2 - 319
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1-15-10
Calling Name Display Allow/Deny Selection
1-15-11
Centralized Billing Allow/Deny Selection
1-15-12
Centralized Billing – Point Code of Center Office Assignment
1-15-13
Centralized Day/Night Switching for Remote Office Assignment
1-15-14
Centralized Day/Night Switching for Main Office Assignment
3-70
CIC Number Assignment
5-05
Common Signaling Channel Route Selection
1-1-05
Start Time Selection
1-5-02
SMDR Print Format
1-5-13
Printer Connected Selection
1-5-14
Printer Line Feed Control Selection
1-5-25
SMDR Valid Call Time Assignment
1-5-26
SMDR Incoming/Outgoing Print Selection
1-8-35
COM Port Baud Rate Setting Assignment
4-56
SMDR Telephone Print Selection
1. When NO is selected, Link Reconnect does not take place.
2. When Local Loop/Ground Start Trunks are used, and a disconnect signal is not received from the network, the
time set in Memory Block 1-1-05 (Start Time Selection) applies for the reconnect to take place.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
