3 - 348 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
Notes
Related Programming
M.B. Number Memory Block Name
7-1
Card Interface Slot Selection
1-16-00
Auto Negotiation Yes/No Selection
1-16-01
Port Speed Selection – 10/100 Base T
1-16-02
Port Duplex Mode Selection
1-16-03
MDI/MDIX Mode Selection
1-16-04
VLAN Mode Selection
1-16-05
Default VLAN ID Assignment
1-16-06
Port Based Priority Selection
1-16-08
High Priority TX Tag Assignment
1-16-09
Low Priority TX Tag Assignment
1-16-10
Port Mirroring Selection
1-16-11
Mirroring Source Port Assignment
1-16-12
Mirroring Target Port Assignment
1-16-13
VLAN Group to VLAN ID Assignment
1-16-14
VLAN Group and Port Selection
1-16-15
VLAN Tag Insertion Selection
1-16-16
Flow Control for Full Duplex Selection
1-16-17
Back Pressure for Half Duplex Selection
1. Only one HUB(8)-U( ) ETU can be assigned and installed for each cabinet.
2. This Memory Block selects which priority field to assign as High. When a received packer contains a Tag per
IEEE802.1q definition, the HUB(8)-U( ) ETU can assign high priority based on this Memory Block.
To Next Page
Loading...
