3 - 352 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
Notes
Related Programming
M.B. Number Memory Block Name
7-1
Card Interface Slot Selection
1-16-00
Auto Negotiation Yes/No Selection
1-16-01
Port Speed Selection – 10/100 Base T
1-16-02
Port Duplex Mode Selection
1-16-03
MDI/MDIX Mode Selection
1-16-04
VLAN Mode Selection
1-16-05
Default VLAN ID Assignment
1-16-06
Port Based Priority Selection
1-16-07
High Priority RX Tag Assignment
1-16-08
High Priority TX Tag Assignment
1-16-10
Port Mirroring Selection
1-16-11
Mirroring Source Port Assignment
1-16-12
Mirroring Target Port Assignment
1-16-13
VLAN Group to VLAN ID Assignment
1-16-14
VLAN Group and Port Selection
1-16-15
VLAN Tag Insertion Selection
1-16-16
Flow Control for Full Duplex Selection
1-16-17
Back Pressure for Half Duplex Selection
1. Only one HUB(8)-U( ) ETU can be assigned and installed for each cabinet.
2. When the HUB(8)-U( ) ETU transmits a packet in VLAN mode, the priority field can be assigned for each packet
transmitted by the assignment of this Memory Block.
This Memory Block assigns the priority value for Low Priority Packets. Memory Block 1-16-08 (High Priority TX
Tag Assignment) assigns the priority for High Priority Packets.
To Next Page
Loading...
