2 - 374 Programming Manual
___________________________________________________________________________________
Document Revison 1 Elite IPK
___________________________________________________________________________________
Notes
1. Specify Call Appearance as the call appearance number of Call Appearance Block numbers from Memory Block
4-43 (Station to Call Appearance Block Assignment).
2. Use this Memory Block to assign the following functions to each of the CO/PBX line keys on each telephone in a
tenant specified as Tenant Mode in Memory Block 2-05 (Line Key Selection):
Not specified (NON)
CO/PBX Line (CO) 01~64
CFW - BNA
CFW - ALL
Call Appearance (C) 00~47, 01~24 (Each Call Appearance Block may have a maximum of 24 Call
Appearance keys).
Feature Access (FA) 01~16
Trunk Group (TKGP) 01~32
Route Advance Block (ADV) 01~32
Secondary Incoming Extension (SIE) 01~C0
Microphone (MIC)
Headset (H SET)
Scroll Key for ANI/Caller ID (SCROLL)
DND On/Off
LOG On/Off
BGM On/Off
Intercom Key (ICM)
To Next Page
Loading...
