NEC Electra Elite IPK - Page 459

2 - 388 Programming Manual
___________________________________________________________________________________
Document Revison 1 Elite IPK
___________________________________________________________________________________
3-11 CO External Source Selection
General Description
Use this Memory Block to specify whether the Music On Hold source is from the CO or
an external source (EXT SOURCE).
Display
Settings

Notes

LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
The shaded
selection is the
default.
CO
EXT
SOURCE
Programming Procedures
1 Go off-line.
2 Press LK3 +
G
+
AA
to access the Memory Block.
3 Press LK2 to change Music On Hold to an external source for CO/PBX No.

Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or CO/PBX No.
– OR –
D
to go to the next assigned CO/PBX No.
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
3-12
CO Hold Memory Selection
When CO is set for EXT SOURCE and left in a trunk group, that CO is skipped in dialing access of the trunk
group.
CO/PBX Line Mod
e
3
Submode
—
Data No.
11
PC Programming
¦ +BCT
0 1 / 1 1 : C O
T I M E D I S P L A Y
Data
No.
Setting
Data
CO/PBX
No.
(01~64)