NEC Electra Elite IPK - Page 47

1 - 16 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
LK 1 System Mode
LK 2 ICM
Data
No.
Memory Block Name Default Value Programming Values
00 Internal Paging Timeout Selection 90s
90s, 120s,
∞
(No Limit)
01 Intercom Call Voice/Tone Signal
Selection
VOICE
TONE
VOICE
02 Automatic Callback Release Time
Selection
30m
30s, 1m, 2m, 3m, 5m, 10m, 20m, 30m
03 2-, 3-, or 4-Digit Station Number
Selection
3DGT
2DGT, 3DGT, 4DGT
04 Call Arrival Key Block Assignment No CAR Blocks are
Assigned
CAR Blocks:
Port 01~CO - 4 ports per block
08 Specified Station Access Code
Assignment
00 = 01
01 ~ 23 Not Set
Tel. Port Number
9~18 Customized Message 1~10
Assignment
09 = DND
10 = MEETING
11 = BUSINESS
TRIP
12 = NOT IN
13 = WITH GUEST
14 = OUT OF
OFFICE
15~18 = Not
Specified
Maximum of 13 characters.
Refer to Appendix B Character Codes,
Section 1 Character Assignment on page
B-1 for a list of characters.
19 Intercom Ring Pattern Selection B
OFF, ON, A~H
20 Intercom Ring Tone Selection A
A~H
21 PS Telephone Block Assignment No CAR Blocks are
Assigned
CAR Blocks:
Port 01~C0 - 4 ports per block
22 Call Forward- No Answer Time
Selection
8s
4s, 8s, 12s, 18s, 24s, 30s, 60s
23 System Call Park Recall Time
Selection
1.0
In minutes: 0.5, 1.0, 1.5, 2.0, 3.0, 5.0, 8.0,
10.0
24 Intercom Feature Access Code
Assignment
Refer to 1-2-24 Intercom Feature Access Code Assignment on
page 2-111.
25 Internal Paging Alert Tone Selection YS
YS (Tone provided)
NO (No Tone)
26 Delayed Ringing Time Assignment
(ICM)
10s
00~99 sec.