NEC Electra Elite IPK - Page 572

Elite IPK Document Revison 1
Programming Manual 2 - 501
___________________________________________________________________________________
___________________________________________________________________________________
4-42 Call Forward-Busy Immediately/
Delay Selection
General Description
Use this Memory Block to specify immediate forward (NO) or delay forward (YS) for an
Incoming CO/PBX call if the station is set for Call Forward–Busy.
Display
Settings

Notes

LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
NO
YS
Programming Procedures
1 Go off-line.
2
Press LK4 +
DB
to access the Memory Block.
3 Press LK1for immediate forward to a station set to Call Forward - Busy for Tel Port No.

Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
B
+
A
to enter A for Port Numbers 100~109
B
+
B
to enter B for Port Numbers 110~119
B
+
C
to enter C for Port Number 120
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-2-22
Call Forward No Answer Time Selection
Telephone ports A0~C0 are ports 100~120.
Telephone Mode
4
Submode
—
Data No.
42
PC Programming
¦ +BTT
Data
No.
0 1 / 4 2 : B U S Y F W D Y S
T I M E D I S P L A Y
Tel
Port
No.
(01
~
C0)
Title
Setting
Data