Elite IPK Document Revison 1
Programming Manual 2 - 527
___________________________________________________________________________________
___________________________________________________________________________________
4-64 Code Restriction Class (without
Authorization Code) Day Mode
Assignment
General Description
Use this Memory Block to specify the Code Restriction Class per station in Day Mode
when Forced Account Code/Authorization Code is set in Memory Block 1-8-08 [Class
of Service (Station) Feature Selection 2] and a call is made without using a Forced
Account Code/Authorization Code.
Display
Programming Procedures
1
Go off-line.
2 Press LK4 +
FD
to access the Memory Block.
3
Use the dial pad to change Day Mode Restriction Class for Tel port No.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
t
o enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
B
+
A
to enter A for Port Numbers 100~109.
B
+
B
to enter B for Port Numbers 110~119.
B
+
C
to enter C for Port Number 120.
Default Value
All Stations Class 15
4 Press
G
to write the data and display the next Memory Block.
5
Program the next Memory Block or press
E
to go back on-line.
CO/PBX Line Mod
To Next Page
Loading...
