NEC Electra Elite IPK - Page 62

Elite IPK Document Revision 1
Programming Manual 1 - 31
___________________________________________________________________________________
___________________________________________________________________________________
21 Tie Line Length of Wink Signal
Selection
180
In milliseconds:
30, 60, 90, 120, 150, 180, 210, 240, 270,
300, 330, 360, 390, 420, 450, 480
22 Tie Line Length of Delay Signal
Selection
300
In milliseconds:
0, 300, 600, 900, 1200, 1500, 1800, 2100,
2400, 2700, 3000, 3300, 3600, 3900, 4200,
4500
24 Tie Line Incoming Interdigit Timeout
Selection
6s
1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s, 10s, 11s,
12s, 13s, 14s, 15s,
∞
(No Limit)
25 Tie Line Wink/Delay Signal Detect
Timeout Selection
7s
1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s, 10s, 11s,
12s, 13s, 14s, 15s,
∞
(No Limit)
27 Tie Line Dial Tone Selection YS
YS, NO
28 Tie Line Reorder Tone Selection YS
YS (Send)
NO (Don’t Send)
29 Trunk Internal Transmit Pad
Selection
8
In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
30 Trunk Internal Receive Pad
Selection
8
In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
31 Trunk External Transmit Pad
Selection
0
In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
32 Trunk External Receive Pad
Selection
0
In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
33 Disconnect Recognition Time
Selection
0.3
In seconds:
0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9,
1.0, 1.1, 1.2, 1.3, 1.4, 1.5
38 Automated Attendant Message to
Trunk Selection
1
Message 1~8 to CO 01~64
40 Automatic Release Signal Detection
Selection
350
In milliseconds:
0, 50, 100, 150, 200, 250, 300, 350, 400,
450, 500, 550, 600, 650, 700,
∞
(No Limit)
41 Delay Announcement Assignment NN
Refer to 3-41 Delay Announcement
Assignment on page 2-424.
42 DIT Assignment No Assignment
N/A
43 ANA Assignment No Assignment
N/A
LK 3 CO/PBX Line Mode (Continued)
Data
No.
Memory Block Name Default Value Programming Values