1 - 34 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
18 Station Name Assignment Not Specified
Up to six digits (characters)
19 Trunk Outgoing Restriction LEDs Off
Off = Not Restricted
On = Restricted
23 Prime Line/Hot Line Assignment Not Specified
Up to 10 digits
24 SLT Hookflash Assignment HOLD
HOLD, DISC
26 DISA ID Number Station
Assignment
01
Refer to 4-26 DISA ID Number Station
Assignment on page 2-482.
28 Multilingual LCD Indication
Selection
ENG
JAPA, FREN, ENG, SPAN
29 HFU Selection NO
NO, YS
30 Hold/Transfer Recall Display
Selection
YS
YS, NO
31 Receiving Internal/All Call Page
Selection
YS
YS, NO
32 Trunk Digit Restriction 00 (No Limit)
00~99
35 Voice Mail/SLT Selection NO
NO, YS
36 Voice Prompt Selection NO
NO, YS
37 Extension Line Key Ring
Assignment (Day Mode)
All LEDs Off
LED Off (No Ring)
Green LED (Immediate Ring)
Red LED (Delayed Ring, Extension Line
Key)
38 Extension Line Key Ring
Assignment (Night Mode)
All LEDs Off
LED Off (No Ring)
Green LED (Immediate Ring)
Red LED (Delayed Ring, Extension LK)
39 APR Ring Mode Assignment STA
NON, STA, ALL
40 LCR Class Selection 0
Class 0~4
41 SIE/CAR Ringing Line Preference
Selection
YS
NO, YS
42 Call Forward - Busy Immediately/
Delay Selection
YS
NO, YS
43 Station to Call Appearance Block
Assignment
All Stations Assigned
Call Appearance
Block 00
Call Appearance Block 00~47
LK 4 Telephone Mode (Continued)
Data
No.
Memory Block Name Default Value Programming Values
To Next Page
Loading...
