Elite IPK Document Revision 1
Programming Manual 2 - 5
___________________________________________________________________________________
___________________________________________________________________________________
Notes
Related Programming
M.B. Number Memory Block Name
1-1-46
Access Code (1-Digit) Assignment
1-1-47
Access Code (2-Digit) Assignment
1-3-02
SLT Hookflash Signal Selection
4-24
SLT Hookflash Assignment
1. A 1- or 2-digit Access Code can be assigned in Memory Block 1-1-46/47 [Access Code (1- or 2-Digit)
Assignment] for Single Line Telephones to send a hookflash signal on a CO/PBX line (default: 6 #).
2. A hookflash from a Single Line Telephone puts an existing call on hold or sends a hookflash signal on the
CO/PBX line.
To Next Page
Loading...
