2 - 12 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
Notes
1. To speak to station user A, station user D dials extension 100.
2. In the example at station A:
The ICM LED blinks, and a ring tone that is different from the normal ringing tone is heard.
The call can be answered by lifting the handset.
Stations B and C users cannot press the line key on the Multiline Terminals to answer the call.
3. In the example, when station user A does not answer in the specified time:
The ringing tone changes to the normal tone and station C starts ringing.
Any station (A, B, or C) user can press the flashing line key to answer the call.
4. After the timeout, the system uses the Day and Night Ringing Assignment and rings the assigned station.
5. Select
∞
(No Limit) to disable this feature.
Example:
(D)
Electra Elite
IPK System II
(A) 100
(B) 101
(C) 102
(C) 102
(B) 101
(A) 100
Time Elapsed
System 1 System 2
In this example, systems 1 and 2 are connected. Stations A (extension 100)
and C (extension 102) are assigned to ring on the Tie line using Memory
Blocks 4-01 and 4-02 [CO/PBX Ring Assignment (Day/Night) Mode].
Electra Elite
System I
Electra Elite
Elite IPK
System I
To Next Page
Loading...
