– 95 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
125 Unsupervised transfer
After holding an incoming C.O. call, an attendant dials a sta-
tion. After connection with the attendant, if the called station
goes on-hook, the attendant returns to the held call.
0
1
Return to held call
Attendant hears ROT
126 Timing of Call Forwarding-Don’t Answer (No Answer) for
trunk incoming call
[Series 3200 R6.2 (R6.2)]
0
1
As per timing for internal call or an
assisted call
(As per CM41 Y=0>15/CM41
Y=0>101/CME6 Y=07)
As per timing for trunk incoming call
(As per CM41 Y=0>01/CM41
Y=0>100/CME6 Y=08)
130 Exclusive Hold on D
term
0
1
Not available
Available
133 A trunk line placed in Consultation Hold by Call Park-System/
Tenant, can be retrieved by pressing trunk line appearance key
on D
term
0
1
Not available
Available
135 Periodic Time Indication Tone sending for C.O. Line connec-
tion See CM41 Y=0>09
0
1
To send
Not sent
136 Periodic Time Indication Tone sending for Tie Line connection
when CM08>135: 0 See CM08>135: 1
0
1
To send
Not sent
137 Ringing signal for a station call with a trunk line placed in Con-
sultation Hold
0
1
Change from Internal to External
Ringing when caller goes on-hook or
presses RLS key
See CM08>138
CM15 Y=83, 84
External Ringing
See CM35 Y=33, 34
Continued on next page
CM08
To Next Page
Loading...
