NEC UNIVERGE NEAX 2000 IPS - Page 752

– 728 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
2 Fault information
store into memory,
and control of
external alarm
Fault Kind: Occurrence 0
3
NONE
External Alarm Kind
0: Fault Memory
store/No output of
External Alarm
1: Fault Memory
store/External
Alarm is MN
alarm
2: Fault Memory
store/External
Alarm is MJ
alarm
3: Fault Memory
store/External
Alarm Kind is
determined by
standard data
[See 2: External
Alarm Kind (MJ/
MN/– –)]
Page 739
No Fault Memory
store/No External
Alarm output
To assign NONE,
enter CCC.
CM08>450, 451
CM42>01, 50
40 Traffic of IP network exceeded
limit bandwidth
[Series 3100]
41 Traffic of IP network exceeded
warning bandwidth
[Series 3100]
42 Communication error occur-
rence between Main Site and
Remote Site
[Series 3200 R6.2 (R6.2)]
NOTE 6
43 SIP fault occurred
[Series 3600]
49 IP component reset occurred
[Series 3500]
4A Long call duration-1
[Series 3900]
NOTE 7
4B Long call duration-2
[Series 3900]
NOTE 7
Continued on next page
~
JUNE/01/2007
CMEA