Oce PlotWave 360 Operation Guide

Preset: [Image]
Setting Settings values Settings values Function
[Original] [Original type] [Lines/text standard]
[Folded lines/text]
[Coloured original]
[Artwork]
[Map]
[Blueprint]
[Dark original]
[Photo]
Define the type of original you use.
For more information on choosing
the correct original type, see Advised
settings for scan jobs on page 219.
[Background
compensation]
[On]
[Off]
[Auto]
Reduce the background noise of the
image.
[Original width] [Auto] The width of the original is automati-
cally detected by the scanner.
[Standard]
Selection of available
standard sizes:
• [A0]
• [A1]
• [A2]
• [A3]
• [E+ (36")]
• [B1 (707 mm)]
• [B2 (500 mm)]
The width of the original is a stand-
ard size.
NOTE
Depends on the media ser-
ies you define in Océ Ex-
press WebTools
[Custom]
You can enter a size
within the range of
210 to 914 mm, or 8.5
to 36".
The width of the original is a custom
size.
Available settings for scan jobs
Chapter 4 - Use the Printing System
233

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches