Cont. 10
Operating Ambient Temperature B-6
Field Wiring Terminal Markings B-6
Power and Control Field Wiring Terminals B-6
Field Grounding Terminals B-7
Field Terminal Kits B-7
Recommended Wire Sizes B-8
Field Grounding Terminals B-9
Operating Ambient Temperature B-9
External Power Semiconductor Protection Fuses B-9
Australia & New Zealand ................................................. B-10
EMC Standards B-10
EMC .............................................................................. B-11
Emissions Limits B-11
EMC General Installation Considerations B-13
Earthing Requirements B-13
Increasing Motor Cable Length B-14
Certificates ..................................................................... B-15
APPENDIX C PARAMETER SPECIFICATION TABLES
Parameter Tables ............................................................. C-1
Specification Table: Tag Number Order ............................. C-2
Parameter Table: MMI Menu Order ................................ C-36
APPENDIX D PROGRAMMING
Programming Your Application ......................................... D-1
Programming with Block Diagrams D-1
Modifying a Block Diagram D-1
Saving Your Modifications D-4
Understanding the Function Block Description D-4
MMI Menu Maps D-5
Function Blocks By Category D-6
Compatibility with Earlier Versions of Firmware D-7
Emulating Earlier Software Versions D-11
Function Block Descriptions ............................................. D-12
5703 IN D-12
5703 OUT D-13
ADVANCED D-14
ALARM HISTORY D-17
ALARMS D-18
ANALOG INPUTS D-22
ANALOG OUTPUTS D-24
AUTOTUNE D-25
AUX I/O D-27
CALIBRATION D-28
COMMS PORT D-31
CONFIGURE DRIVE D-33
CURRENT LOOP D-34
CURRENT PROFILE D-39
DEADBAND D-40
DEMULTIPLEXER D-41
DIAMETER CALC. D-42
DIGITAL INPUTS D-50
DIGITAL OUTPUTS D-53
DRIVE INFO D-56
ENCODER D-58
FEEDBACKS D-61
FIELD CONTROL D-62
INERTIA COMP D-70
LINK D-71
INVERSE TIME D-72
JOG/SLACK D-73
LOGIC FUNC D-76
MENUS D-82
MIN SPEED D-83
miniLINK D-84
MULTIPLEXER D-85
OP STATION D-86
PID D-88
PLL (PHASE LOCKED LOOP) D-93
To Next Page
Loading...
