Parker AC30 series - Page 141

Fieldbuses A-19
AC30 series Variable Speed Inverter
Using a CoDeSys Based PLC
The example in this section uses the default parameter mapping of the inverter described under Parameter Mapping in the Inverter Configuration
section above:
Input Mapping Table
Data Type
Bytes
000
0627 Comms Control Word
WORD
2
001
0681 Comms Reference
REAL
4
002
0000
Output Mapping Table
Data Type
Bytes
000
0661 Status Word
WORD
2
001
0395 Actual Speed Percent
REAL
4
002
0000
A CoDeSys (V3.5 SP10) soft PLC running on a PC is used.
1. Start a new project from CoDeSys using a CODESYS Control Win V3 device.
2. From the CoDeSys menu select Tools->Device Repository… and install the AC30 EDS file. The device will appear under Fieldbuses as
shown.