Parker AC30 series - Page 150

A-28 Fieldbuses
AC30 series Variable Speed Inverter
TCP/IP Interface Object – F5h
Instance
Attribute
Description
Type
Value
Access
1
1
Status
UINT
0
Interface Configuration not
configured
1
Interface Configuration comes
from DHCP
2
Interface Configuration comes
from non-CIP settings
Get
2
Configuration
capability
DWORD
Bit 2 – DHCP capable (1)
Bit 5 – non-CIP setting capable (1)
Get
3
Configuration control
DWORD
- If DHCP is disabled then writing a
value of 0 is allowed
- If DHCP is enabled then writing a
value is 2 is allowed
Get/Set
4
Physical Link Object
Structure of:
Path Size
Path
UINT
Array of WORD
2
20F6h 2401h
Get
5
Interface
Configuration
Structure of:
IP Address
Network Address
Gateway Address
Name Server
Name Server 2
Domain Server Size
Domain Name
UDINT
UDINT
UDINT
UDINT
UDINT
UINT
STRING
Inverter IP address
Inverter network mask
Inverter gateway address
0
0
Returns the Domain Name if DHCP is
enabled and the DHCP server has
provided it.
Get
6
Host Name
Structure of:
Size
Host Name
UINT
STRING
If DHCP is enabled and bound, returns
the Host Name if the DHCP server has
provided it, otherwise returns the
default Host Name derived from the
AC30 MAC address.
Get
13
Encap TMO
UINT
Inactivity TMO seconds.
On Type 1 Reset this value will revert
to a value of 120.
Get/Set
Supported Service Code
Service Name
01h
Get_Attribute_All
0Eh
Get_Attribute_Single
10h
Set_Attribute_Single