Parker AC30 series User Manual

C-164 Parameter Reference
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Quickstop Time Limit
0507
Parameters::Motor Control::Ramp
30.000 0.000 to 3000.000 s
ALWAYS
Maximum time that the Drive will try to Quickstop, before quenching
Quickstop Ramp Time
0508
Parameters::Motor Control::Ramp
0.100 0.000 to 600.000 s
ALWAYS
Rate at which the Speed Demand is ramped to zero when Quickstop is active
Final Stop Rate
0509
Parameters::Motor Control::Ramp
1200 1 to 4800 Hz/s
ALWAYS
Rate at which any internally generated setpoint trims are removed. For example, the trim due to the slip compensation in Volts/Hz
control mode.

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485