Parker AC30 series User Manual

Parameter Reference C-181
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Encoder Speed Percent
1855
Parameters::Option IO::Encoder % NEVER
The speed measured by the encoder, as a percentage of 100% Speed.
Encoder Count Reset
1669 Same as PNO 1663 FALSE ALWAYS
Resets the encoder count.
Encoder Count
1670 Same as PNO 1668 Min to Max NEVER
The encoder count is a 32 bit count which will increment and decrement with the encoder pulses, up to (or down to) 2^31.

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485