R&S ZNL Series User Manual

General instrument setup
R&S
®
ZNL/ZNLE
142User Manual 1178.5966.02 ─ 20
Limit fail beeps for limit tests, ripple tests, and circle tests is not affected by this setting.
If enabled, those beeps are generated even if "Sounds" is unchecked.
Note: The R&S ZNL/ZNLE does not have a built-in audio device and loudspeaker. To
hear sounds, connect a USB audio device to the instrument or operate it via remote
desktop.
Transparent Info Fields
This checkbox enables or disables transparent info fields for markers and trace statis-
tics.
Transparent info fields do not hide an underlying trace.
Remote command:
n.a.
Show Sweep Symbols
This checkbox turns sweep symbols on or off.
Sweep symbols are arrows pointing downward onto the trace. They are displayed if the
sweep time exceeds an upper limit, e.g. if the number of points is high or the measure-
ment bandwidth is low.
Remote command:
n.a.
Use Default Tab for Hardkey
If the checkbox is selected (system default), the Function keys activate the first
enabled tab of their associated softtool. Otherwise the last used tab is activated.
For background information, see Chapter 10.1, "Function Keys and softtools",
on page 309.
Remote command:
n/a
Conductance in Embedding Networks
Changes the presentation of "capacitance C<i> in parallel with resistance R<i>" circuit
blocks in lumped de/embedding networks (see Chapter 9.6.2.3, "Circuit models for 2-
port networks", on page 285 and Chapter 9.6.2.4, "Circuit models for 4-port networks",
on page 286).
If active, the resistance R<i> is displayed and specified as conductance G<i> (=1/
R<i>).
Remote command:
SYSTem:DISPlay:CONDuctancesn/a
Pressing Hardkey Reactivates Softkey Bar
If the checkbox is selected (default), then pressing a function key displays the related
softtool and keeps the softkey bar open. Otherwise, if the softkey bar is hidden, it
appears only for a few seconds.
The softkey bar can be hidden using its close button or via display settings (see Chap-
ter 7.2.1.2, "Displayed items", on page 121).
VNA setup

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English