Getting Started
R&S
®
ZNL/ZNLE
74User Manual 1178.5966.02 ─ 20
4.4.2.1 Toolbar functions
Standard functions can be performed via the icons in the toolbar at the top of the
screen.
You can hide the toolbar display, e.g. when using remote control, to enlarge the display
area for the measurement results ("Setup" > "Display" > "Displayed Items" ).
See Chapter 7.2.1.2, "Displayed items", on page 121.
You can also configure which icons are displayed in the toolbar.
For details see Chapter 7.7, "Toolbar configuration", on page 145.
If the list of available icons becomes longer than the height of the screen, an arrow at
the bottom of the toolbar indicates that further icons are available.
Print immediately...........................................................................................................74
Open............................................................................................................................. 74
Save..............................................................................................................................74
Undo..............................................................................................................................75
Redo..............................................................................................................................75
Zoom mode...................................................................................................................75
Multiple zoom mode......................................................................................................75
Zoom off........................................................................................................................75
SmartGrid......................................................................................................................75
Sequencer ....................................................................................................................75
Gen On/Off....................................................................................................................75
Gen Config....................................................................................................................75
Help (+ Select).............................................................................................................. 75
Help...............................................................................................................................75
Disconnect RF2.............................................................................................................76
Frequency lock..............................................................................................................76
Windows........................................................................................................................76
Print immediately
Prints the current display (screenshot) as configured.
See Chapter 6.3, "Creating screenshots of current measurement results and settings",
on page 105.
Open
Opens a file from the instrument ("Save/Recall" menu).
See Chapter 6.2, "Storing and recalling instrument settings and measurement data",
on page 95.
Save
Stores data on the instrument ("Save/Recall" menu).
Operating the instrument
To Next Page
Loading...
