R&S ZNL Series - Page 860

Command reference
R&S
®
ZNL/ZNLE
860User Manual 1178.5966.02 ─ 20
Suffix:
<Ch>
.
Channel number
Parameters:
<TouchstoneFile> String parameter to specify the name and directory of the loaded
Touchstone file.
If no path is specified the analyzer searches the current direc-
tory, which can be set and queried using MMEMory:
CDIRectory?
Example:
CALC:TRAN:VNET:SEND:GLO:TND FIMP
Select the 1-Port Data (s1p) circuit model.
MMEM:LOAD:VNET:GLO:EMB 'C:\Users\Public\
Documents\Rohde-Schwarz\ZNL\Embedding\Test.s1p'
Load a Touchstone file.
Manual operation: See "File Name 1" on page 540
MMEMory:LOAD:VNETworks<Ch>:PPAir:DEEMbedding<ListId>
<TouchstoneFile>[, <Port>[, <Interchange>]]
MMEMory:LOAD:VNETworks<Ch>:PPAir:EMBedding<ListId> <TouchstoneFile>[,
<Port>[, <Interchange>]]
Loads the S-parameter data that (partly) specify the deembedding network of port
group <ListId> from local Touchstone files.
Use CALCulate<Ch>:TRANsform:VNETworks:PPAir:DEEMbedding<ListId>:
TNDefinition or CALCulate<Ch>:TRANsform:VNETworks:PPAir:
EMBedding<ListId>:TNDefinition to select the desired circuit model before
loading the data files.
●
For any n-port set, the FIMPort model requires a single *.s<2n>p file and hence
a single set command.
●
For 2-port sets (port pairs), the circuit models STSL | STSC | SLST | SCST
require 2 *.s2p files, that have to be assigned to the appropriate port using two
set commands.
Suffix:
<Ch>
.
Channel number
<ListId> Index of the port set within the channel's overall list of port sets
for deembedding.
Parameters:
<TouchstoneFile> String parameter specifying the name and directory of the loa-
ded Touchstone file.
If no path is specified, the analyzer searches the current direc-
tory, which can be set and queried using MMEMory:
CDIRectory?
VNA command reference