R&S ZNL Series - Page 864

Command reference
R&S
®
ZNL/ZNLE
864User Manual 1178.5966.02 ─ 20
MMEMory:STORe:CORRection <Channel>, <CalGroupFile>
Copies the correction data of channel <Channel> to the cal pool, generating a new
correction data file (cal group). The file has the extension *.cal and is stored in the
C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\Data
directory.
Setting parameters:
<Channel> Channel number
<CalGroupFile> String parameter to specify the name of the created cal group
file. There is no need to specify the directory path and file exten-
sion; the analyzer uses the default cal pool directory
C:\Users\Public\Documents\Rohde-Schwarz\ZNL
\Calibration\Data and a *.cal extension.
Example: See MMEMory:LOAD:CORRection
Usage: Setting only
Manual operation: See "Add / Add All... / Replace / Apply / Apply to All"
on page 523
MMEMory:STORe:CORRection:TCOefficient<Ch> <PmclFile>
Saves two-port transmission coefficients of channel <Ch> to a power meter correction
list file.
Suffix:
<Ch>
.
Channel number
Parameters:
<DeEmbedding
Position>
BOTH | DUT | PM
Determines the two-port the command refers to:
DUT
The two-port between VNA and DUT (during measurement)
PM
The two-port between VNA and PM (during power calibration)
BOTH
Both positions
(parameter omitted)
If the parameter is omitted, the command refers to the two-port
selected using SOURce<Ch>:POWer<PhyPt>:CORRection:
TCOefficient:CALibration.
VNA command reference