To Next Page

To Previous Page

Command reference

R&S

ZNL/ZNLE

865User Manual 1178.5966.02 ─ 20

Setting parameters:

<PmclFile> String parameter specifying the name and directory of the cre-

ated power meter correction list file. The file extension *.pmcl

is mandatory.

If no path is specified, the analyzer searches the current direc-

tory, to be queried with MMEMory:CDIRectory?

*RST: n/a

Example: See SOURce:POWer:CORRection:TCOefficient[:STATe]

Usage: Setting only

Manual operation: See "Recall... / Save..." on page 516

MMEMory:STORe:LIMit

Saves the limit lines associated to a specified trace to a limit line file. Limit lines are

created using the CALCulate<Chn>:LIMit... commands.

Setting parameters:

<TraceName> Name of an existing trace in the active channel setup (string

parameter) for which a limit line definition exists.

<LimLineFile> String parameter to specify the name and directory of the cre-

ated limit line file. The default extension (manual control) for limit

line files is *.limit, although other extensions are allowed.

If no path is specified the analyzer searches the current direc-

tory, to be queried with MMEMory:CDIRectory?

Example: See MMEMory:LOAD:LIMit

Usage: Setting only

Manual operation: See "Recall... / Save..." on page 437

MMEMory:STORe:MARKer <AsciiFile>

Saves the values of all markers to an ASCII file.

Setting parameters:

<AsciiFile> String parameter to specify the name and directory of the cre-

ated ASCII file. The default extension (manual control) for

marker files is *.txt, although other extensions are allowed.

If no path is specified the analyzer searches the current direc-

tory, to be queried with MMEMory:CDIRectory?

VNA command reference

R&S ZNL Series User Manual

Other manuals for R&S ZNL Series