R&S ZVB - Page 578

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT GUI Reference
System Menu
Operating Manual 1145.1084.12 – 30 563
The TCP/IP Mode configuration field controls how the IP address for the instrument gets assigned (see
also TCP/IP Configuration). For the manual configuration mode, the static IP address, subnet mask, and
default gateway are used to configure the LAN. The automatic configuration mode uses DHCP server or
Dynamic Link Local Addressing (Automatic IP) to obtain the instrument IP address.
Changing the LAN configuration is password-protected. The password reads LxiWebIfc (notice
upper and lower case characters). This password cannot be changed in the current firmware version.
The subentries of the Lan Configuration menu open other pages:
 Ping Client provides the ping utility to verify the connection between the instrument and other
devices.
 Advanced LAN Configuration provides LAN settings that are not declared mandatory by the LXI
standard.