R&S ZVB - Page 774

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 759
HCOPy:PAGE:MARGin:LEFT <numeric_value>
Defines the distance between the left edge of the page and the left edge of the printed information.
<numeric_value>
Left margin.
Range [def. unit]
0.01 mm to 10000 mm [mm]
*RST value
n/a (*RST does not affect the printer configuration)
SCPI, Command Types
Device-specific, command or query
Example:
HCOP:PAGE:MARG:LEFT 10; RIGHT 10
Set an left and a right margin of 1 cm.
HCOPy:PAGE:MARGin:RIGHt <numeric_value>
Defines the distance between the right edge of the page and the right edge of the printed information.
<numeric_value>
Right margin.
Range [def. unit]
0.01 mm to 10000 mm [mm]
*RST value
n/a (*RST does not affect the printer configuration)
SCPI, Command Types
Device-specific, command or query
Example:
HCOP:PAGE:MARG:LEFT 10; RIGHT 10
Set an left and a right margin of 1 cm.
HCOPy:PAGE:MARGin:TOP <numeric_value>
Defines the distance between the top of the page and the top of the printed information.
<numeric_value>
Upper margin.
Range [def. unit]
0.01 mm to 10000 mm [mm]
*RST value
n/a (*RST does not affect the printer configuration)
SCPI, Command Types
Device-specific, command or query
Example:
HCOP:PAGE:MARG:BOTT 10; TOP 10
Set an upper and a lower margin of 1 cm.
HCOPy:PAGE:ORIentation PORTrait | LANDscape
Defines the orientation of the printed page. Switching between LANDscape and PORTrait rotates the
hardcopy result by 90 degrees. No other settings are changed.
PORTrait |
Short edge of the paper is the top of the page.
LANDscape
Long edge of the paper is the top of the page.
*RST value
n/a (*RST does not affect the printer configuration)