R&S ZVB - Page 788

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 773
Query the cal group file for channel 2. Response:
'Calgroup1.cal'
MMEM:LOAD:CORR:RES 2,'Calgroup1.cal'
Resolve the pool link between channel 2 and the cal group
file.
MMEM:LOAD:CORR? 2
Query the cal group file for channel 2. Response: ''
MMEM:DEL:CORR 'Calgroup1.cal'
Delete the created cal group file.
MMEMory:LOAD:CORRection:MERGe <Channel>, '<file1>.cal', '<file2>.cal', ...
Merges (activates) several cal group files for channel no. <channel> (equivalent to the Calibration Pool
list in the Calibration Manager dialog). The merged cal group files can be stored to a common file; see
example.
<channel>
Channel number of an existing channel.
'<file1>.cal',
'<file2>.cal', ...
String parameters with the names of the cal group files to be merged. Cal group
files must have the extension *.cal. The file extensions must be specified as part
of the string parameters.
In contrast the directory path must not be specified; the analyzer always uses the
default path C:\Program Files\Rohde&Schwarz\Network
Analyzer\Calibration\Data.
*RST value
–
SCPI,
Command
Types
Device-specific, no query.
Example:
SENS1:CORR:COLL:METH:DEF 'Test', FRTRans, 1, 3
Define a bidirectional transmission normalization between
ports 1 and 3 as calibration Test for channel 1.
CORR:COLL:METH:DEF?
Query the defined calibrations for channel 1. The response
is FRTR0103.
CORR:COLL:SAVE:SEL:DEF; :MMEM:STOR:CORR 1, 'P1-P3.cal'
Create a default calibration data set for the selected
calibration and store the data to a cal group file.
SENS1:CORR:COLL:METH:DEF 'Test', FRTRans, 1, 4
Overwrite channel 1's existing calibration Test by a
bidirectional transmission normalization between ports 1 and
4.
CORR:COLL:METH:DEF?
Query the defined calibrations for channel 1. The response