10
10-70
MULTIJUNCTION TIMERS
10.3 TOP (Output-Related 16-Bit Timer)
32180 Group User’s Manual (Rev.1.0)
10.3.4 TOP Control Registers
The TOP control registers are used to select operation modes of TOP0–10 (single-shot output, delayed single-
shot output or continuous output mode), as well as select the count enable and count clock sources. Following
four TOP control registers are provided for each timer group.
• TOP0–5 Control Register 0 (TOP05CR0)
• TOP0–5 Control Register 1 (TOP05CR1)
• TOP6,7 Control Register (TOP67CR)
• TOP8–10 Control Register (TOP810CR)
To Next Page
Loading...
