Renesas M32R/ECU Series

10-101
10
10.4 TIO (Input/Output-Related 16-Bit Timer)
MULTIJUNCTION TIMERS
32180 Group User’s Manual (Rev.1.0)
10.4.4 TIO Control Registers
The TIO control registers are used to select operation modes of TIO0–9 (measure input, noise processing input,
PWM output, single-shot output, delayed single-shot output or continuous output mode), as well as select the
count enable and count clock sources.
Following TIO control registers are provided for each timer group.
• TIO0–3 Control Register 0 (TIO03CR0)
• TIO0–3 Control Register 1 (TIO03CR1)
• TIO4 Control Register (TIO4CR)
• TIO5 Control Register (TIO5CR)
• TIO6 Control Register (TIO6CR)
• TIO7 Control Register (TIO7CR)
• TIO8 Control Register (TIO8CR)
• TIO9 Control Register (TIO9CR)