Remote Control
R&S
®
FSVA/FSV
631Operating Manual 1176.7510.02 ─ 09
CALCulate<n>:DELTamarker<m>:SGRam:Y:MAXimum:NEXT
This command positions the specified delta marker on the next peak level of the verti-
cal axis. The search includes frames above and below the current marker position. It
does not change the horizontal position of the delta marker.
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example:
CALC:DELT2:SGR:Y:MAX
Activates and positions delta marker 2 on the peak level of the y-
axis.
CALC:DELT2:SGR:Y:MAX:NEXT
Positions delta marker 2 on the next higher level.
Usage: Event
Manual operation: See "Search Mode for Next Peak in Y Direction" on page 305
CALCulate<n>:DELTamarker<m>:SGRam:Y:MAXimum[:PEAK]
This command positions the specified delta marker on the current peak level of the ver-
tical axis. The search is performed over all frames. It does not change the horizontal
position of the deltamarker.
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example:
CALC:DELT2:SGR:Y:MAX
Activates and positions delta marker 2 on the peak level of the y-
axis.
Usage: Event
Manual operation: See "Marker Search Type" on page 306
CALCulate<n>:DELTamarker<m>:SGRam:Y:MINimum:ABOVe
This command positions the specified delta marker on the next minimum level of the
vertical axis. The search includes only frames above the current marker position. It
does not change the horizontal position of the delta marker.
The command is available for the spectrogram.
Remote Control – Commands
To Next Page
Loading...
