Rohde & Schwarz FSVA - Page 750

Remote Control
R&S
®
FSVA/FSV
750Operating Manual 1176.7510.02 ─ 09
<t> irrelevant
Parameters:
<Range> Range: 10 to 200
*RST: 100
Default unit: dB
Example:
DISP:TRAC:Y 110dB
Manual operation: See "Range Log 100 dB" on page 226
See "Range Log 50 dB" on page 226
See "Range Log 10 dB" on page 227
See "Range Log 5 dB" on page 227
See "Range Log 1 dB" on page 227
See "Range Log Manual" on page 227
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:MODE
<Mode>
This command selects the type of scaling of the y-axis.
When SYSTem:DISPlay:UPDate is turned off, this command has no immediate
effect on the screen.
Suffix:
<n>
.
window; For applications that do not have more than 1 measure-
ment window, the suffix <n> is irrelevant.
<t> irrelevant
Parameters:
<Mode> ABSolute
absolute scaling of the y-axis
RELative
relative scaling of the y-axis
*RST: ABS
Example:
DISP:TRAC:Y:MODE REL
Manual operation: See "Grid Abs/Rel " on page 230
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel <ReferenceLevel>
This command defines the reference level.
With the reference level offset ≠ 0, the value range of the reference level is modified by
the offset.
The unit depends on the setting defined with CALCulate<n>:UNIT:POWer.
Suffix:
<n>
.
irrelevant.
<t> irrelevant
Remote Control – Commands