Network operation and remote control
R&S
®
SMB100B
303User Manual 1178.3711.02 ─ 08
Prefix ← User table
Shows the access right of the selected user.
Level ← User table
Shows the security level of the selected user.
Delete ← User table
Removes the selected user from the list.
Remote command:
SYSTem:COMMunicate:SNMP:USM:USER:DELete on page 381
Add SNMP User for HUMS
Configuration dialog for defining SNMP users and their profiles.
Remote command:
SYSTem:COMMunicate:SNMP:USM:USER on page 380
SNMP User Name ← Add SNMP User for HUMS
Defines the name of the user for assigning specific user rights. Entering a user name is
mandatory.
SNMP User Prefix ← Add SNMP User for HUMS
Defines the access right for a user.
"Read Only"
Allows the user to only read information.
"Read & Write"
Allows the user to read and modify information.
Remote access settings
To Next Page
Loading...
