Network operation and remote control
R&S
®
SMB100B
336User Manual 1178.3711.02 ─ 08
Starting from now, all steps you perform are recorded.
2. To stop SCPI recording, select "context-sensitive menu > Stop SCPI recording".
The "SCPI Recording List" dialog opens automatically.
3. Proceed with How to check a SCPI list.
How to record SCPI lists manually
1. To retrace your settings, open the context-sensitive menu and select "Mark all
Parameters Changed from Preset".
This function identifies and highlights all settings you have changed, both in the
block diagram, and in the dialogs.
2. For selectively recording your steps:
a) Set the parameter.
b) Open the context-sensitive menu.
c) Select "Add SCPI Command to Recording List"
Tip: You cannot see "Add SCPI ..." in the menu?
A possible reason is opening the menu outside of a dialog or input field, for
example in a block diagram. Open the context-sensitive menu within the corre-
sponding dialog or input field, and the feature is available.
d) Continue with the next setting, and repeat steps a to b whenever needed.
Each time you select "Add SCPI ...", the SCPI command is appended to a tempo-
rary list.
To automate tasks with remote command scripts
To Next Page
Loading...
