Rohde & Schwarz R&S SMB100B - Page 533

Remote control commands
R&S
®
SMB100B
533User Manual 1178.3711.02 ─ 08
Parameters:
<SBits> 1 | 2
*RST: n.a. (factory preset: 1)
Example: See Example"Finding out VISA resource strings" on page 518.
Manual operation: See "Stop Bits" on page 292
:SYSTem:COMMunicate:SOCKet:RESource?
Queries the visa resource string for remote control via LAN interface, using TCP/IP
socket protocol.
Return values:
<Resource> string
Example: See Example"Finding out VISA resource strings" on page 518.
Usage: Query only
Manual operation: See "Socket" on page 291
:SYSTem:COMMunicate:USB:RESource?
Queries the visa resource string for remote control via the USB interface.
Return values:
<Resource> string
Example: See Example"Finding out VISA resource strings" on page 518.
Usage: Query only
Manual operation: See "USB" on page 291
:SYSTem:HELP:EXPort
Saves the online help as zip archive in the user directory.
Example:
:SYSTem:HELP:EXPort
MMEM:CDIR?
// "/var/user"
MMEM:CAT?
// ..,"Log,DIR,4096","help.tgz,BIN,69836600"
// confirms that help zip archive is saved.
Usage: Event
Manual operation:: "Setup > Help > Export Help to User Path"
:SYSTem:IDENtification <Identification>
Selects the mode to determine the "IDN String" and the "OPT String" for the instru-
ment, selected with command :SYSTem:LANGuage.
SYSTem subsystem